Huayin 20 ton recycling waste car tire recycling pyrolysis plant
diesel
The plastic waste that can be seen everywhere seriously pollutes
our living environment, how to dispose of this plastic waste
properly is increasingly important. Huayin waste plastic pyrolysis
plant can recycle the waste plastic to fuel oil, carbon black, and
gas through pyrolysis technology, the whole process is
environmentally friendly and brings you large profit .
Oil ratio
| Raw materials | Oil ratio |
| PP (Microwave oven food box/yogurt bottles, ect.) | 50%-75% |
| PS(fast food boxes/instant noodle boxes) | 50%-75% |
| PE(plastic film/plastic wrap) | 50%-75% |
| Plastic cable | 80% |
| ABS(engineering plastic) | 40% |
| Leftovers of paper | Wet 15-20%,Dry 60% |
| House garbage | 35%-50% |
| Plastic bags | 50% |
| Submarine cable | 75% |
| Rubber cable | 35% |
| Sole | 30% |
| Small tires | 45%-50% |
| Big tires | 35%-40% |
Advantages of Main parts of the pyrolysis plant
1. High efficiency. The feeding port of the pyrolysis reactor is
1400mm, so the waste material doesn’t need pretreatment, it can be
put into the pyrolysis reactor directly with the auto feeder
machine.
2. High stability. The rollers are engineered underfeeding port and
oil outlet port which are external from the heating area to bring
perfect rotating balance and longer service life.
3. Energy saving: Non-condensable gas will go back to the heating
system for second burning as heating material, saving your heating
fuel.
4. High oil yield: Larger condensation area to ensure sufficient
condensation of oil gas into liquid oil.
5. Eco-friendly: The stainless steel deduster is filled with
ceramic filters inside, which brings it strong dust adsorption
capacity and a good dedusting effect.
6. High safety level: Equipped with Alarm, auto pressure releasing
device, anti backfire device, vacuum pump to ensure the machine
working smoothly.
Specification
| Item | Content |
| Raw materials | Waste tyre/rubber |
| Output | 45% fuel oil, 30% carbon black, 10% steel wire, 10%-15% syngas |
| Model | Reactor size | Capacity |
| HY1500*3000 | 1 T/batch |
| HY2000*4000 | 3T/batch |
| HY2200*6000 | 5 T/batch |
| HY2600*6000 | 7 T/batch |
| HY2600*6600 | 8 T/batch |
| HY2800*6000 | 9 T/batch |
| HY2800*6600 | 10 T/batch |
| HY2800*8100 | 15 T/batch |
| Reactor material and thickness | Q345R/Q245R/310S (Boiler plate/stainless steel) 14mm/16mm/18mm |
| The whole plant weight | 15-45 tons |
| Land area | 300-400m2(L30-40m*W10m) |
| Number of workers | 3-4 |
| Processing time and power | 10-24 hours. Averagely 15KW/h |
| Certification | CE, ISO, BV, SUV, SGS Oil Report, Emission Report, 11 patents |
Working process
1: Feeding. Feed tires into reactor manually or with auto feeder;
2: Preheating. Waste tyres will be melted under high temperatures
and oil gas comes out.
3: Oil-producing. Oil gas goes through the cooling system and is
cooled down into liquid fuel oil; Some oil gas that can not be
turned into liquid oil will go back to the heating furnace for
second burning.
4: Cooling. After the oil processing is finished, leave the plant
for cooling.
5: Carbon black discharging.
Installation cases
